Technical papers

Want to know more about our technical publications ? Our teams have published technical documents related to the behavior…

Scroll down to explore

Applications specific technical publications

Chemical process industry

New Insights into Material Selection for Phosphate Applications

S. Le Manchet (2021)

Résistance à la corrosion des aciers inoxydables dans l’industrie chimique

S. Le Manchet (2020)

Corrosion Resistance of High-Alloyed Stainless Steels in Seawater Desalination – Heat Exchangers

N. Larché, J. Eidhagen, S. Le Manchet, H. Marchebois, U.Kivisäkk, D. Thierry (2017)

Corrosion resistance of duplex stainless steels in thermal desalination plants

S. Jacques, J. Peultier, J-C. Gagnepain, P. Soulignac (2008)

Construction and Infrastructure

Atmospheric Corrosion Resistance of Stainless Steels for Architecture

S. Le Manchet, D. Paul (2017)

General

Electrochemical Potentiodynamic Reactivation (EPR) technique to detect intermetallic phases in duplex stainless steels microstructure

M. Monnot, E. Robin, S. Le Manchet (2019)

Effect of welding operations & residual aluminum content on duplex UR™2205 (1.4462) properties

S. Le Manchet, G. Passot (2018)

Results of a field test on stainless steels buried in soils

P. Boillot, B. Chareyre, V. Baudu, J. Peultier (2011)

Oil and gas production, transport & storage

2202 Lean Duplex Stainless Steel for Storage Tanks

J. Grocki, S. Le Manchet (2020)

Influence of ferrite content in HAZ on stress corrosion resistance

M. Monnot, B. Chareyre, G. Passot, R. Monier, S. Le Manchet (2019)

Corrosion Resistance of Roll-Bonded Clad Plates for Oil & Gas Applications

S. Le Manchet, S. Cissé, C. Chauvy (2018)

Wide and Thick Austenitic Stainless Steel Plates

S. Cissé (2019)

Development of a 22%Cr Duplex Stainless Steel with Enhanced Weldability and Toughness Properties for Oil & Gas Applications

S. Le Manchet, S. Cissé, G. Passot, D. Paul (2019)

Stainless Steel Tanks and Tank Bottoms Providing Both Cost and Leak Control

J. Grocki, S. Le Manchet (2018)

Abrasion-corrosion resistance of stainless and wear resistant steels for oil sands applications

S. Le Manchet, A. Proust (2016)

Substitution of Carbon Steels for ASME SA-533 Type E for Lightweight Equipment

V. Ngomo (2019)

Benefits of Quenched and Tempered API 5L Steels for Pipelines in Sour Service

V. Ngomo, A. Georgescu, A. Gingell (2018)

Development of Steels for Low Temperature Applications

S. Pillot (2015)

Development of 7Ni Quenched and Tempered Steel Plates for LNG Storage Tanks

N. Loukachenko, P. Toussaint, F. Arrogante, S. Corre (2015)

Estimation of CTOD in the case of very thick plates by knowing CVN values at a given temperature

S.Pillot, S.Corre, C.Chauvy, P.Toussaint (2010)

9Ni Steel for FLNG Storage Tanks – A Key Enabling Technology

P. Toussaint (2004)

Recent Experience on Sour Resistant Steels Behavior

N.Loukachenko, P.Bourges, P.Toussaint, C.Chauvy, L.Coudreuse, K.Orie (2009)

Challenges, properties and features of 9% nickel steel plates for LNG storage and transport : towards ultra-large designs

Toussaint P, Pillot S, Chauvy C (2007)

Petroleum refining

UR TM 825 (UNS N08825) & SIRIUS TM 800H (UNS N08810)

Y. Zhang (2020)

Evaluation of hydrogen embrittlement in V-modified Cr-Mo steels

S Pillot, C Chauvy, L Coudreuse, P Bourges (2009)

Effect of Pre-Strain on Mechanical Properties of Pressure Vessel Grades – Assessment of Stress Relieving / Post Weld Heat Treatments Efficiency to Regenerate Properties.

D. Heritier, S. Pillot, C. Chauvy, P. Toussaint, S. Corre (2012)

Effect of Temper and Hydrogen Embrittlement on Mechanical Properties of 2,25Cr-1Mo Steel Grades – Application to Minimum Pressurizing Temperature (MPT) Issues

S. Pillot, C. Chauvy (2012)

Effect of Temper and Hydrogen Embrittlement on Mechanical Properties of 2,25Cr-1Mo Steel Grades – Application to Minimum Pressurizing Temperature (MPT) Issues

S Pillot, S.Corre, Ph. Bourges, L Coudreuse, C Chauvy, P Toussaint (2010)

Experience Achieved on Sour Service Resistant Steels Behavior – Consequences of PWHT Requirements

N.Loukachenko, P.Bourges, P.Toussaint, S. Corre, C.Chauvy, L.Coudreuse (2010)

Hydrogen Related Problems in Cr-Mo Pressure Vessel Steels Advantages of V containing grades

L. Coudreuse, S. Pillot, C. Chauvy (2010)

Hydrogen in Cr-Mo(-V) Pressure Vessel Steels

Chauvy C., Coudreuse L., Pillot S., Bourges Ph. (2009)

Effect of ageing and hydrogen on facture mechanics and CVN properties of 2,25Cr1Mo steel grades – application to MPT issues

S Pillot, P Bourges, L Coudreuse, C Chauvy, P Toussaint, K. Orie (2009)

How to Prevent Reheat Cracking of Weld Metal A542D

C. Chauvy, S. Pillot (2009)

Prevention of Weld Metal Reheat Cracking During CrMoV Heavy Reactors Fabrication

C. Chauvy, S. Pillot (2009)

Effect of Temper and Hydrogen Embrittlement on Mechanical Properties of 2,25Cr-1Mo Steel Grades – Application to Minimum Pressurizing Temperature (MPT) Issues

S. Pillot, C. Chauvy, S. Corre, L. Coudreuse, (2012)

Toughness problems in steel welded joints during fabrication and service for thick components

P Bourges, C Chauvy, S Pillot (2008)

Effect of Hydrogen on mechanical behavior for 2,25Cr1Mo grades (standard and Vanadium added)

Pillot S, Coudreuse L, Bourges Ph, Toussaint P (2008)

Specific problems in refining – high temperature, high pressure and hydrogen – case of 2,25Cr1Mo and 2,25Cr1MoV steels

S. Pillot (2008)

Toughness problems in steel welded joints

Bourges Ph., Chauvy C;, Pillot S. (2008)

Overview of Hydrogen Related Problems in Pressure Vessel Steels

L. Coudreuse, C. Chauvy, S.Pillot (2008)

Hydrogen Induced Disbonding: from laboratory tests to actual service conditions.

Coudreuse L., Pillot S., Bourges Ph., Gingell A. (2005)

Numerical simulation of heat treatments of CrMo steels

Clergé M., Boucher C., Pillot S., Bourges Ph (2005)

Optimisation of ISR and PWHT of CrMo(V) Steels

Bourges Ph, Pillot S., Bertoni A. Clergé M., Boucher C. (2005)

Optimisation of ISR and PWHT of CrMo(V) Steels

Bourges Ph, Pillot S., Bertoni A. Clergé M., Boucher C. (2004)

Standard reliable testing procedure for 2¼Cr-1Mo-V welding quality control & acceptance – Prevention of SAW Filler Material reheat cracking during fabrication of heavy reactors – MiniJIP Program.

S. Pillot, C. Chauvy (2012)

Comparison Of Hydrogen Solubility And Diffusivity In CrMo And CrMoV Steels_Hydrogen Induced Disbonding

S.Pillot, S.Corre, C. Chauvy, L. Coudreuse, P. Toussaint, A. Gingell (2012)

Cracking Resistance of Super-Austenitic Stainless Steels in Sour Environments

B. Chareyre (2018)

On the possible use of 9Cr-1Mo-VNb for the fabrication of refining pressure vessels A review of available data and points to overcome

S. Pillot (2016)

An update of the limits of use of Stainless Steels in sour environments

S. Cissé, S. Le Manchet (2017)

Corrosion resistance of UNS S31803 duplex stainless steel in sour environments

S. Le Manchet, T. Cassagne (2014)

Effect of the Heat Treatment on the Corrosion Resistance of Roll-bonded Clad Plates for Oil & Gas Applications

S. CISSE (2018)

Consideration on Tempering and PWHT Temperatures of C-Mn and Low Alloy Steels Used for the Fabrication of Pressure Vessels – Smart Tuning of Heat Treatment Parameters

S. Pillot, M. Sakata, L. Coudreuse, V. Ngomo (2018)

Alternative Metallurgies Reduce The Cost of Amine Gas Treating Units

G. Perdu, X. Courtial, F. Kittel, S. Le Manchet, D. Cornut, V. Ngomo (2018)

Optimizing Heat Treatment Parameters for Heavy-wall Vessels in 1.25Cr-0.5Mo Material

V. Ngomo, L. Coudreuse (2017)

Effect of Cumulated Heat Treatments on CrMo(V) Properties – Misunderstanding and Good Practices

S. Pillot (2017)

Stress Oriented Hydrogen-Induced Cracking Resistance of ASTM A516 Grade 70 Carbon-Manganese Steel for Oil & Gas Applications

S. Le Manchet, D. Heritier, N. Loukachenko, P. Toussaint (2017)

New Developments on Hot Rolled Bonded Clad Plates

S. CISSE (2017)

SOHIC Resistance of ASTM A516 Grade 70 Carbon Manganese Steel for Oil and Gas Applications

S. Le Manchet, D. Heritier, N. Loukachenko, P. Toussaint (2016)

Effect of Pre-Strain on Mechanical Properties of Pressure Vessel Grades – Assessment of Stress Relieving / Post Weld Heat Treatments Efficiency at Regenerating Properties.

D. Heritier, S. Pillot, C. Chauvy, P. Toussaint, S. Corre (2013)

CrMo and CrMoV for Hydroprocessing Units

S. Pillot (2015)

The Role of VC precipitates in Hydrogen Assisted Cracking of Vanadium Modified 2¼Cr1Mo Steel

K. Nibur, R. Gangloff, B. Somerday, S. Pillot (2014)

Effect Of Hydrogen Charging Method On Fracture Properties Of 2¼Cr-1Mo(-V) Alloys – Application Of Fracture Mechanics Concepts – Review Of Available Data

S. Pillot, D. Héritier, S; Corre, L. Coudreuse, P. Toussaint (2014)

Hydrogen Cracking of Cr-Mo-V Steel from High Pressure H2 Service

S. Pillot, K. Nibur, R. Gangloff (2014)

Definition of a Charpy V-Notched mastercurve to fit transition of ferritic steels

S. Pillot, P. Pacqueau (2014)

Request for an Amendment of the EN 13445-4 Construction Code

S. Pillot (2014)

Lecture on Hydrogen Embrittlement of Cr-Mo Steels used in Refining Industry

S. Pillot (2014)

Development and Production of Creep and Hydrogen Resistant Grade 91 (9Cr1MoV) – Heavy Plates for New Generation High Efficiency Refining Reactors

S. Pillot, C. Chauvy, S. Corre, L. Coudreuse, (2013)

Hydrogen Cracking of Cr-Mo-V Steel From Trapping, diffusion and solubility of hydrogen in 2,25Cr1MoV

R. P. Gangloff, S. Pillot, K. Nibur (2013)

Creep behaviour of Cr-Mo(V) Steels and their welds – Metallurgical and environment aspects – Extrapolation laws

P.Balladon, Ph.Bourges, S.Pillot, A.Gingell (2003)

Petrochemicals

Corrosion Resistant Alloys for Phosphoric Acid Production and Storage

S. Le Manchet (2019)

An update on material selection for phosphoric acid production, transportation and storage

S. Le Manchet (2018)

Influence of thermal aging on the mechanical properties of lean duplex 1.4062 (UR2202) on plates and welds

S. Cissé, G. Passot (2018)

Use of stainless steels in the industry: recent and future developments

P. Boillot, J. Peultier (2013)

Hydrogen and High Temperature Resistant V-Modified 9Cr-1Mo Heavy Plates Devoted to New Generation High Performance Petrochemical Reactors.

S.Pillot, Z.Zhao, S.Corre, C. Chauvy, L. Coudreuse, P. Toussaint (2011)

Power generation

Influence of FAO, manganese oxide and bromide on the corrosion resistance of duplex and superaustenitic materials for wet FGD systems

S. Le Manchet, G. Grocki (2014)

Coal Powers plants

Industeel Experience With P91

S Pillot, C Chauvy, P. Toussaint (2009)

Thick Plates in Gr92 for High Temperature Service

S. Pillot, P. Bourges, C.Chauvy, A. Allard, P.Toussaint (2007)

Nuclear power plants

Thick Plates In Grade 91 For Fourth Generation Nuclear Reactor

S. Pillot, Z. Zhao, C.Chauvy, S. Corre, P. Toussaint, L. Coudreuse (2010)

Grade P91 Thick Plates For New Generation Nuclear Reactors

Z. Zhao, S. Pillot, C.Chauvy, S. Corre, P. Toussaint, L. Coudreuse (2010)

Material specific publications

Stainless Steels

New Insights into Material Selection for Phosphate Applications

S. Le Manchet (2021)

Stainless Steel Tanks and Tank Bottoms Providing Both Cost and Leak Control

J. Grocki, S. Le Manchet (2018)

Use of stainless steels in the industry: recent and future developments

P. Boillot, J. Peultier (2013)

Influence of thermal aging on the mechanical properties of lean duplex 1.4062 (UR2202) on plates and welds

S. Cissé, G. Passot (2018)

An update on material selection for phosphoric acid production, transportation and storage

S. Le Manchet (2018)

Corrosion Resistant Alloys for Phosphoric Acid Production and Storage

S. Le Manchet (2019)

Corrosion resistance of UNS S31803 duplex stainless steel in sour environments

S. Le Manchet, T. Cassagne

An update of the limits of use of Stainless Steels in sour environments

S. Cissé, S. Le Manchet (2017)

Cracking Resistance of Super-Austenitic Stainless Steels in Sour Environments

B. Chareyre (2018)

UR TM 825 (UNS N08825) & SIRIUS TM 800H (UNS N08810)

Y. Zhang (2020)

Abrasion-corrosion resistance of stainless and wear resistant steels for oil sands applications

S. Le Manchet, A. Proust (2016)

Corrosion Resistance of Roll-Bonded Clad Plates for Oil & Gas Applications

S. Le Manchet, S. Cissé, C. Chauvy (2018)

Résistance à la corrosion des aciers inoxydables dans l’industrie chimique

S. Le Manchet (2020)

Development of a 22%Cr Duplex Stainless Steel with Enhanced Weldability and Toughness Properties for Oil & Gas Applications

S. Le Manchet, S. Cissé, G. Passot, D. Paul (2019)

Wide and Thick Austenitic Stainless Steel Plates

S. Cissé (2019)

Influence of ferrite content in HAZ on stress corrosion resistance

M. Monnot, B. Chareyre, G. Passot, R. Monier, S. Le Manchet (2019)

2202 Lean Duplex Stainless Steel for Storage Tanks

J. Grocki, S. Le Manchet (2020)

Results of a field test on stainless steels buried in soils

P. Boillot, B. Chareyre, V. Baudu, J. Peultier (2011)

Effect of welding operations & residual aluminum content on duplex UR™2205 (1.4462) properties

S. Le Manchet, G. Passot (2018)

Electrochemical Potentiodynamic Reactivation (EPR) technique to detect intermetallic phases in duplex stainless steels microstructure

M. Monnot, E. Robin, S. Le Manchet (2019)

Atmospheric Corrosion Resistance of Stainless Steels for Architecture

S. Le Manchet, D. Paul (2017)

Corrosion resistance of duplex stainless steels in thermal desalination plants

S. Jacques, J. Peultier, J-C. Gagnepain, P. Soulignac (2008)

Corrosion Resistance of High-Alloyed Stainless Steels in Seawater Desalination – Heat Exchangers

N. Larché, J. Eidhagen, S. Le Manchet, H. Marchebois, U.Kivisäkk, D. Thierry (2017)

Influence of FAO, manganese oxide and bromide on the corrosion resistance of duplex and superaustenitic materials for wet FGD systems

S. Le Manchet, G. Grocki (2014)

Steels for pressure vessels and clad plates

Industeel Experience With P91

S Pillot, C Chauvy, P. Toussaint (2009)

Effect of ageing and hydrogen on facture mechanics and CVN properties of 2,25Cr1Mo steel grades – application to MPT issues

S Pillot, P Bourges, L Coudreuse, C Chauvy, P Toussaint, K. Orie (2009)

Hydrogen Cracking of Cr-Mo-V Steel From Trapping, diffusion and solubility of hydrogen in 2,25Cr1MoV

R. P. Gangloff, S. Pillot, K. Nibur (2013)

Effect of Pre-Strain on Mechanical Properties of Pressure Vessel Grades – Assessment of Stress Relieving / Post Weld Heat Treatments Efficiency at Regenerating Properties.

D. Heritier, S. Pillot, C. Chauvy, P. Toussaint, S. Corre (2013)

Comparison Of Hydrogen Solubility And Diffusivity In CrMo And CrMoV Steels_Hydrogen Induced Disbonding

S.Pillot, S.Corre, C. Chauvy, L. Coudreuse, P. Toussaint, A. Gingell (2012)

Effect of Temper and Hydrogen Embrittlement on Mechanical Properties of 2,25Cr-1Mo Steel Grades – Application to Minimum Pressurizing Temperature (MPT) Issues

S. Pillot, C. Chauvy, S. Corre, L. Coudreuse,

S. Pillot, C. Chauvy (2012)

Effect of Pre-Strain on Mechanical Properties of Pressure Vessel Grades – Assessment of Stress Relieving / Post Weld Heat Treatments Efficiency to Regenerate Properties.

D. Heritier, S. Pillot, C. Chauvy, P. Toussaint, S. Corre

Effect of Temper and Hydrogen Embrittlement on Mechanical Properties of 2,25Cr-1Mo Steel Grades – Application to Minimum Pressurizing Temperature (MPT) Issues

S. Pillot, C. Chauvy (2012)

Effect of Temper and Hydrogen Embrittlement on Mechanical Properties of 2,25Cr-1Mo Steel Grades – Application to Minimum Pressurizing Temperature (MPT) Issues

S Pillot, S.Corre, Ph. Bourges, L Coudreuse, C Chauvy, P Toussaint (2010)

Experience Achieved on Sour Service Resistant Steels Behavior – Consequences of PWHT Requirements

N.Loukachenko, P.Bourges, P.Toussaint, S. Corre, C.Chauvy, L.Coudreuse (2010)

Hydrogen Related Problems in Cr-Mo Pressure Vessel Steels Advantages of V containing grades

L. Coudreuse, S. Pillot, C. Chauvy (2010)

Hydrogen in Cr-Mo(-V) Pressure Vessel Steels

Chauvy C., Coudreuse L., Pillot S., Bourges Ph. (200ç)

How to Prevent Reheat Cracking of Weld Metal A542D

C. Chauvy, S. Pillot

Lecture on Hydrogen Embrittlement of Cr-Mo Steels used in Refining Industry

S. Pillot (2014)

Evaluation of hydrogen embrittlement in V-modified Cr-Mo steels

S Pillot, C Chauvy, L Coudreuse, P Bourges

Prevention of Weld Metal Reheat Cracking During CrMoV Heavy Reactors Fabrication

C. Chauvy, S. Pillot (2009)

Toughness problems in steel welded joints during fabrication and service for thick components

P Bourges, C Chauvy, S Pillot (2008)

Effect of Hydrogen on mechanical behavior for 2,25Cr1Mo grades (standard and Vanadium added)

Pillot S, Coudreuse L, Bourges Ph, Toussaint P (2008)

Specific problems in refining – high temperature, high pressure and hydrogen – case of 2,25Cr1Mo and 2,25Cr1MoV steels

S. Pillot (2008)

Toughness problems in steel welded joints

Bourges Ph., Chauvy C;, Pillot S. (2008)

Overview of Hydrogen Related Problems in Pressure Vessel Steels

L. Coudreuse, C. Chauvy, S.Pillot (2008)

Hydrogen Induced Disbonding: from laboratory tests to actual service conditions.

Coudreuse L., Pillot S., Bourges Ph., Gingell A. (2005)

Numerical simulation of heat treatments of CrMo steels

Clergé M., Boucher C., Pillot S., Bourges Ph (2005)

Optimisation of ISR and PWHT of CrMo(V) Steels

Bourges Ph, Pillot S., Bertoni A. Clergé M., Boucher C.

Optimisation of ISR and PWHT of CrMo(V) Steels

Bourges Ph, Pillot S., Bertoni A. Clergé M., Boucher C. (2004)

Development and Production of Creep and Hydrogen Resistant Grade 91 (9Cr1MoV) – Heavy Plates for New Generation High Efficiency Refining Reactors

S. Pillot, C. Chauvy, S. Corre, L. Coudreuse, (2013)

Request for an Amendment of the EN 13445-4 Construction Code

S. Pillot (2014)

Thick Plates in Gr92 for High Temperature Service

S. Pillot, P. Bourges, C.Chauvy, A. Allard, P.Toussaint (2007)

Effect of the Heat Treatment on the Corrosion Resistance of Roll-bonded Clad Plates for Oil & Gas Applications

S. CISSE (2018)

Thick Plates In Grade 91 For Fourth Generation Nuclear Reactor

S. Pillot, Z. Zhao, C.Chauvy, S. Corre, P. Toussaint, L. Coudreuse (2010)

Grade P91 Thick Plates For New Generation Nuclear Reactors

Z. Zhao, S. Pillot, C.Chauvy, S. Corre, P. Toussaint, L. Coudreuse (2010)

Substitution of Carbon Steels for ASME SA-533 Type E for Lightweight Equipment

V. Ngomo (2019)

Benefits of Quenched and Tempered API 5L Steels for Pipelines in Sour Service

V. Ngomo, A. Georgescu, A. Gingell (2018)

Development of Steels for Low Temperature Applications

S. Pillot (2015)

Development of 7Ni Quenched and Tempered Steel Plates for LNG Storage Tanks

N. Loukachenko, P. Toussaint, F. Arrogante, S. Corre (2015)

Estimation of CTOD in the case of very thick plates by knowing CVN values at a given temperature

S.Pillot, S.Corre, C.Chauvy, P.Toussaint (2010)

9Ni Steel for FLNG Storage Tanks – A Key Enabling Technology

P. Toussaint (2009)

Recent Experience on Sour Resistant Steels Behavior

N.Loukachenko, P.Bourges, P.Toussaint, C.Chauvy, L.Coudreuse, K.Orie

Challenges, properties and features of 9% nickel steel plates for LNG storage and transport : towards ultra-large designs

Toussaint P, Pillot S, Chauvy C (2007)

Hydrogen and High Temperature Resistant V-Modified 9Cr-1Mo Heavy Plates Devoted to New Generation High Performance Petrochemical Reactors.

S.Pillot, Z.Zhao, S.Corre, C. Chauvy, L. Coudreuse, P. Toussaint (2011)

Consideration on Tempering and PWHT Temperatures of C-Mn and Low Alloy Steels Used for the Fabrication of Pressure Vessels – Smart Tuning of Heat Treatment Parameters

S. Pillot, M. Sakata, L. Coudreuse, V. Ngomo (2018)

Definition of a Charpy V-Notched mastercurve to fit transition of ferritic steels

S. Pillot, P. Pacqueau (2014)

Alternative Metallurgies Reduce The Cost of Amine Gas Treating Units

G. Perdu, X. Courtial, F. Kittel, S. Le Manchet, D. Cornut, V. Ngomo (2018)

Optimizing Heat Treatment Parameters for Heavy-wall Vessels in 1.25Cr-0.5Mo Material

V. Ngomo, L. Coudreuse (2017)

Effect of Cumulated Heat Treatments on CrMo(V) Properties – Misunderstanding and Good Practices

S. Pillot (2017)

Stress Oriented Hydrogen-Induced Cracking Resistance of ASTM A516 Grade 70 Carbon-Manganese Steel for Oil & Gas Applications

S. Le Manchet, D. Heritier, N. Loukachenko, P. Toussaint

New Developments on Hot Rolled Bonded Clad Plates

S. CISSE (2017)

On the possible use of 9Cr-1Mo-VNb for the fabrication of refining pressure vessels A review of available data and points to overcome

S. Pillot (2016)

SOHIC Resistance of ASTM A516 Grade 70 Carbon Manganese Steel for Oil and Gas Applications

S. Le Manchet, D. Heritier, N. Loukachenko, P. Toussaint (2016)

CrMo and CrMoV for Hydroprocessing Units

S. Pillot (2015)

The Role of VC precipitates in Hydrogen Assisted Cracking of Vanadium Modified 2¼Cr1Mo Steel

K. Nibur, R. Gangloff, B. Somerday, S. Pillot (2014)

Effect Of Hydrogen Charging Method On Fracture Properties Of 2¼Cr-1Mo(-V) Alloys – Application Of Fracture Mechanics Concepts – Review Of Available Data

S. Pillot, D. Héritier, S; Corre, L. Coudreuse, P. Toussaint (2014)

Hydrogen Cracking of Cr-Mo-V Steel from High Pressure H2 Service

S. Pillot, K. Nibur, R. Gangloff (2014)

Creep behaviour of Cr-Mo(V) Steels and their welds – Metallurgical and environment aspects – Extrapolation laws

P.Balladon, Ph.Bourges, S.Pillot, A.Gingell (2003)

Our products

Our industries

Our services

Downloads

News

About

Contact

Technical papers

Applications specific technical publications

Chemical process industry

Construction and Infrastructure

General

Oil and gas production, transport & storage

Petroleum refining

Petrochemicals

Power generation

Coal Powers plants

Nuclear power plants

Material specific publications

Stainless Steels

Steels for pressure vessels and clad plates